Inspirations - handy4homes - lifestyle has a new pin from December 2, 2015 at 03:36PM

Description: fantastic ideas liked by handy4homes.com - Arlington, MA
By Handy4homes
put it on Inspirations - handy4homes - lifestyle

Multi Function Modular Storage Organizer Drawer

I’ve shared FIVE different organization projects with you that have all taken place in this one Multi Function Modular Storage Organizer Drawer.  That’s a lot of function in a little space.  The top two trays slide back and forth exposing one compartment or another of the four different compartments on the bottom level.  Or they can be completely removed to access the entire bottom level at one time.  Want to see it in action?  (Plus the last build video out of the series.)

Multi Function Modular Storage Organizer Drawer

Yes, this little drawer really packs a punch in organization arena!  I started out creating the sliding driver bit tray and then added the lower level bit storage area.

Then I added the adjustable pegboard drawer organizer.

And topped it off with the sliding drill bit storage tray that sits shares a sliding ledge with the driver bit tray above the lower level.

And I didn’t forget to leave a place for a few “bit set cases”.  These cases hold my “grab and go” bits.  The Milwaukee case holds an array of my most commonly used driver bits as well as a few small drill bits.  Then I have one set each, standard and metric, common sized brad point drill bits. I haven’t used any of those drill bits yet but I have them ready if I need them.

A reader emailed me yesterday and told me I was creating a lean shop.  I like that!  I did get on an organizing kick because I was so tired of all the time I was wasting searching for things that I needed to use.  No more.  I’m all organized up in here now.  At least in this one drawer!

And it makes me a HAPPY CAMPER!

from http://bit.ly/1N42H9N

DIY_Express

Use Silicone Caulk to Weatherize Your Windows

Now that the temperature has dropped we realize it’s time to weatherize our windows.

We noticed some drafts around one of our windows and after closer inspection realized the weatherstripping was cracked and pulling away from the window. There’s an easy way to fix this using silicone caulk, here’s how we did it.

The first step is to clean your windows and remove all of the old caulk. If it’s already dry and cracked it should pull away from the window very easily. Otherwise use a razor blade and screwdriver to help dislodge it.

We recommend using 100% silicone caulk from GE, as it’s weatherproof and can withstand our hot summers and the suns UV rays.

Check out this guide for the full step-by-step instructions for weatherizing your windows.

from http://bit.ly/1SwhsWw

DIY_Express

How To: Bleed a Radiator

Now that the temperature is falling, you may have cranked up the heat in your house only to find that one (or more) o...

from http://bit.ly/1Tk2Eug

DIY_Express

Quick Tip: Detect Air Leaks for Only $1

When you've moved your plans indoors to escape the seasonal chill, a draft to send you back under the blankets is the...

from http://bit.ly/1YFUWyh

DIY_Express

Drill Bit Storage

I have ONE more “bit” storage organizer to share with you, this one is for regular ole’ drill bits.  The dividers are permanently fixed but the labels can be rearranged to accommodate new bits.   Like in my adjustable pegboard divider organizer where I store my Spade and Forstner bits)

Drill Bit Storage

This simple drill bit organizer tray is made of a 1/4″ mdf bottom, sized to fit my drawer.  I attached a scrap piece of birch (about 1″ tall) across the top of the tray.  The dividers are 1/4″ MDF strips that I cut on the table saw with my MicroJig pushblock.  I cut half the dividers 1/2″ wide and the other half at 1/4″.

I glued the dividers onto the bottom piece using a scrap of wood as a spacer to make sure the dividers were all evenly placed.  (Actually a clamping aid I made) that I picked up off my messy shop floor.)  Affiliate links:  Glue Bot and Speedball Rubber Roller

 

After I’d glued on half the tray with the 1/2″ tall dividers, I set a piece of wood on top of them and then weighted that down while the glue set up.

Then I attached the shorter dividers.  These are for smaller bits so the dividers need to be shorter to make it easy to retrieve the bits.  

The smaller bits don’t need as much room so I used a smaller spacer between these smaller dividers as well.

Then I weighted these shorter dividers down and waited for the glue to set up.

At this point you could attach another piece of wood at the bottom of the tray to enclose the drill bit slots.  I waited on that step until I had put all my bits away just because I knew I’d probably have to rearrange them a few times to make them fit and it’s a little easier to simply slide the bit out of the open space that it is to pick it up.

Time to make labels and move all the drill bits out of all the random packages and kits I had all over the shop.

I had this one larger drill bit set “kit” where the case was always a pain to open and the bit sizes were so hard to read I needed a magnifying glass.  I had to take it out of the drawer to do both tasks I just mentioned so removing only the bits I will ever use and storing them in my new tray with large enough to read labels is a great upgrade for me.

Once all my bits were in place I attached a piece of wood to enclose the bottom so all my bits don’t slide out now that I want them to stay put.

I even had enough space to store my completely “one time use 5 years ago” bits like the ones for concrete and glass but I might as well keep them because I might need them again some day so they’ve been kicking around in my junk drawer.

And this tray fits right over my spade and Forstner bit storage organizer that I shared yesterday.  I can reach one or the other half of the bottom set by sliding the top tray back or forward.

Or I can easily remove the whole tray to access the complete bottom part of the drawer.  Boom.

from http://bit.ly/1LM1v9b

DIY_Express

Provide Maximum Protection for Your iPhone with tech21 Cases and Screens

I haven’t always been a case guy, but after losing my last iPhone to a shattered screen, I quickly converted. I recently had an opportunity to test out a couple of new cases from tech21 that both provide a ton of protection but offer different features based on user preference. Here’s my review after a week of using each tech21 iPhone case.

tech21 Evo Mesh Case Review

I prefer a minimal iPhone case as I carry mine in my pocket and want to keep the phone profile as slim as possible. The iPhone 6 is tall enough as it is, so any added bulk in a case isn’t ideal when keeping it in your pocket. The tech21 Evo Mesh Case is the thinnest iPhone case I’ve seen and after a week of use I’m certain it provides almost as much protection as much thicker cases.

I’ve used a Otterbox case for quite a while and it’s slim and sturdy, but the Evo Mesh Case is even smaller and the soft grip is much nicer to hold and less likely to slip out of my hand. If it does slip from your hand the advanced impact protection is rated at 6.6 feet and the Evo Mesh features FlexShock™ material that protects the back and corners of your phone from all bumps and bruises.

With the Evo Mesh Case my iPhone feels like it’s been enveloped in a second skin. It slides nicely into my front or back pants pocket and the dark red and black color provides the understated look I prefer. It’s available in five different colors for those who want to add a bit more pizzazz to their phones. I tested the Evo Mesh case with my iPhone 6 but it’s also compatible with the iPhone 6 plus, iPhone 6S, and iPhone 6S plus.

tech21 Patriot Case Review

For those who seek the most protection for their iPhones, the tech21 Patriot case is your best option. It’s rated at 13 feet drop protection and features a dust and splash proof case which is ideal for busy jobsites or outdoor activities.

The tech21 Patriot case is best used when paired with the belt holster that securely fastens your iPhone to your side. It can swivel 360 degrees and your iPhone easily snaps off for quick access.

The front impact shield screen protector features BulletShield™ from BASF which is also used in bullet proof glass. It absorbs and dissipates the force away from the point of impact to protect your screen from damage. The side and back feature FleshShock™ from tech21 which also dissipates and repels the damage from impact.

All ports, speakers, and microphones are covered and protected with acoustic vents that let sound in and out but no dirt, dust, or moisture.

More features include:

• Impactology™ featuring FlexShock™ impact material
• Advanced impact absorption through geometric ribbing structure
• 360° impact protection
• Built in Impact Shield screen protector with advanced, multi-layer impact protection, self-heal anti-scratch surface, perfect optical clarity and anti-rainbowing
• Built to exceed MIL STD 810G.516.6 with 4m / 13ft drop protection
• Access to all features of iPhone
• Exceptional audio quality

tech21 Impact Shield: Self-Heal

The impact shield provided with the Patriot case is also available as a stand-alone screen that can be used on your iPhone without a case or coupled with a case such as the Evo Mesh. By using both the Impact Shield and Evo Mesh case, your phone will have 360 degree protection but with a minimal footprint.

The Impact Shield screen has BulletShield™ technology and is self-healing and anti-scratch. It comes with an easy applicator so there’s no need to worry about bubbles or fingerprints.

A tech21 iPhone case will provide peace of mind for as long as you own your phone. By protecting it from damage while you use it, it will also help retain its resale value once you are ready to trade it or sell it when you upgrade.

 

 

from http://bit.ly/1lVdaO7

DIY_Express